SLYD 800-1200KW 2400rpm ±0.05%FS High Dynamic and High Torque
Dynamometer
Introduction to SLYD Series Dyno
The SLYD dynamometer adopts AC frequency conversion feedback
loading, and the loading energy is fed back to the power grid
through the AC load generator; the torque and speed are measured
directly by the torque sensor;
Technical Advantages
1. Energy saving of electric dynamometer: the basic principle of hydraulic and eddy current dynamometer is to
convert the mechanical energy generated by the prime mover into
heat energy, which will be taken away by water cooling. The energy
generated by the prime mover can not be recovered, and energy
consumption is also required in the conversion process. However,
the electric dynamometer can convert the mechanical energy
generated by the prime mover into electrical energy and feed back
to the internal power grid for other equipment to use.
2. The loading mode of electric dynamometer: the hydraulic dynamometer can only be loaded in one direction, and
the loading performance will be worse when the speed is lower than
a certain value; it can not be used as reverse towing equipment,
and it needs to be equipped with additional driving equipment when
the engine mechanical efficiency test is required. The eddy current
dynamometer can be bi-directional loading, but its loading
performance is worse than that of hydraulic dynamometer at low
speed, so it can not be used as reverse towing equipment. When the
engine mechanical efficiency test needs to be done, additional
traction equipment should be equipped.
Three Elements of Electricity Selection
- Torque test range: the torque of dynamometer should not exceed the
range torque value. If the test is completed in a short time, there
will be no big problem.
- Speed test range: the speed of the dynamometer is usually the speed
that can not be exceeded. If it is used for a long time, the
service life of the dynamometer will be greatly shortened,
especially the mechanical wear.
- The power marked on the dynamometer usually refers to the power
absorbed by the dynamometer, because the general dynamometer is the
output power of the measured part. Strictly speaking, this index
can not be exceeded, otherwise the dynamometer will easily be
burned out because of heat.
Technical Parameter
| Project | Parameters |
| Rated speed (RPM) | 1000 |
| Constant torque speed range (RPM) 100-1500 | 0-1000 |
| Constant power speed range (RPM) | 1000-2000 |
| Maximum speed (RPM) | 2400 |
| Torque measuring device | HBM,Germany |
| Torque flange range (nm) | 0-10000 |
| Accuracy class | ± 0.05% FS |
| Encoder, | heidenham, Germany |
| Encoder type | HTL / 1024 |
Specifications (Can be customized)
| Model | Power(KW) | Torque(Nm) | Rated Speed(rpm) | Max Speed(rpm) | Torque Measurement Accuracy |
| SLYD800 | 800 | 2865 | 1000 | 2400 | 0.05%FS |
| SLYD900 | 900 | 3342 | 1000 | 2400 | 0.05%FS |
| SLYD1000 | 1000 | 3820 | 1000 | 2400 | 0.05%FS |
| SLYD1100 | 1000 | 4297 | 1000 | 2400 | 0.05%FS |
| SLYD1200 | 1200 | 4775 | 1000 | 2400 | 0.05%FS |
| Can be customized | | | | | |
FAQ
Q:What’s the minimum order quantity for our cooperation?
A: We support small trail order of 1 pcs for stock products.
Q: How can I learn more about the products?
A: Please leave your email and we will send you your electronic
sample book.
Q: What’s your payment term?
A: Normally 30% T/T deposit, pay in full before shipment.
Q:What’s the lead time for my orders?
A: Dynamometers production cycle is 6-8 weeks, sensors prodction
cycle is 2-3 weeks, other products please contact with us.
Q: How do we get the overall solution of the test bench?
A: Leave us your email, our technical staff will communicate with
you about the detailed plan.
Q:Can I come to visit your factory?
A: Sure, you are always welcome to have a visit.
About Us
SeeLong Intelligent Technology (Luoyang Henan) Co., LTD., is a
professional production of automotive power system test equipment
high technology services enterprises. SeeLong is located in the
Peony City(famous for peonies) -- Luoyang, which is also the
ancient capital of 13 dynasties.
Why Choose Us
After years of development and accumulation, the company has become
a well-known powertrain test equipment production enterprises.
Specializing in engine test, transmission test, energy storage
test, controls and electric motor test and other test equipment
research, development and production service. The company has
established long-term cooperation with tsinghua university,
Shandong university and many other domestic scientific
institutions. We have successfully passed the ISO9001 Quality
System certification, obtained a dozen of invention patents and two
software copyrights. We have provided professional services and
equipment for more than 100 users at home and abroad and which is
ongoing now and will continue in the future.
Prospect of Cooperation
Friendly cooperation provides you both high quality products and
long-term professional after-sales service.
